🗺️ See a floor flat from above or in 3D, spin and center it, choose how much detail your computer draws, and hide the rooms that should stay private.
The view tools need a building with a 3D model and a selected floor.
Switch between 2D and 3D
Open the building and pick a floor in the floor selector.
Click Switch to 3D view in the toolbar at the bottom of the map, or press C. The same button, now Switch to 2D view, takes you back.
The keyboard does the rest while the map has focus: R and L rotate, + and - zoom, D centers the view, the up and down arrows change floor, and Esc steps back out of whatever is open. H is the hand tool for panning, V the select tool, and the space bar switches between them. Center view is also in the three-dot menu.
Choose the view settings
Open the three-dot menu in the toolbar and choose View settings.
Detail level: Low, Medium or High. Lower it on a slow computer. High is the default on a large screen, Medium on a small one.
Hide sensitive areas: see below.
Enable snapping: measurements snap to walls and corners. Hold Ctrl to measure freely for a moment. See Turn snapping on or off.
Show BIM areas: draws the model's own area outlines. X toggles it.
Turn table mode spins the building slowly, at the Rotation speed you set.
Reset to default puts everything back. The settings are kept in this browser, not on your account.
Switch to the satellite map
Click Layers and, under Map type, choose Satellite or Default. The choice colors the outdoor map and the ground under the 3D model, and lasts for the browser tab.
Hide sensitive rooms
Open the space that should stay private, such as a server room, and choose Mark as sensitive in its three-dot menu. With Hide sensitive areas switched on, the room's label and what is inside it are not drawn on the selected floor. The public reporting form always hides them.
On a phone
The toolbar is not shown. Tap Layers and open Map interactions: Tilt switches 2D and 3D, Center recenters, Distance measurement and Area measurement measure, and Fullscreen uses the whole screen. View settings is in the same menu.
If it doesn't work
The 3D button is missing
Pick a floor in the floor selector first. A building without a 3D model has no 3D view; see Vyer Light and Vyer Standard.
The map stutters
Set Detail level to Low in View settings, and check what your device can handle.
